Product Overview
This is SPCC cold rolled steel sheet, cold reduced from hot rolled pickled coil and then either left full hard or finish annealed and skin passed. Because it is rolled at room temperature the surface is smooth and the thickness is held far tighter than hot rolled sheet – about +/-0.03 mm at 0.5 mm – so a press tool is set once and stays set. Full hard material gives high yield strength for structural and pressure parts, while the annealed and skin passed grade draws and bends without cracking for appliance fascias, drum bodies and furniture back panels.
Specifications
| Parameter | Value |
|---|---|
| Thickness | 0.3 – 2.0 mm |
| Width | 1000 / 1219 / 1250 mm |
| Sheet size | 1000 x 2000 / 1219 x 2438 / 1250 x 2500 mm |
| Grade | SPCC / SPCD / SPCE |
| Temper | Full hard / semi hard / annealed |
| Surface finish | Matte / bright / extra bright |
| Thickness tolerance | +/- 0.03 mm (0.3-0.6 mm) / +/- 0.05 mm (0.6-2.0 mm) |
| Yield strength (full hard) | 240 – 400 MPa |
| Elongation (annealed) | min 30% |
| Surface treatment | Oiled / dry / chromate passivated |
| Coil weight | 3 – 10 tons |
Applications
Rolled into appliance side panels and door skins, drum and pail bodies, file cabinet and shelf panels, light gauge tube and cable tray. Buyers in Nigeria, Egypt, Bangladesh and Vietnam use annealed stock for drum making and furniture, while full hard sheet goes into purlin, duct and steel door backing plates.
Packing / Delivery / Payment
Coils are wrapped in VCI anti-rust paper with a steel jacket, or cut sheets are stacked flat on a wooden skid with edge protectors and a plastic cover; a 20GP holds about 25 tons and flat sheet loads without distortion. Lead time is 20-30 days from stock or order. Payment by L/C at sight or T/T with 30% deposit. EN 10204 3.1 MTC, SGS inspection, packing list, commercial invoice and Certificate of Origin are provided.