Product Overview
The T post is cold roll formed from strip into a T section with an embossed centre rib that raises bending stiffness, and the leg is punched with a wire hole every 100 mm so fencing wire or clips pass straight through with no extra hardware. The whole post is hot dip galvanized at 80-120 g/m2 and the buried end is cut to a driving point, so it goes into firm ground with a driver or a hand maul. Small section, low weight – a kilometre of fence uses far less steel than timber or concrete posts.
Specifications
| Parameter | Value |
|---|---|
| Weight | 1.25 / 1.33 / 1.86 lb per ft |
| Section | Embossed studded T |
| Post width | 28 – 32 mm |
| Post length | 1.5 / 2.1 / 2.4 / 3.0 m |
| Zinc coating | 80 – 120 g/m2 |
| Wire holes | one every 100 mm |
| Steel grade | Q235B |
| Bending resistance | holds 300 kg pull without bending |
| Point | Cut driving point / cap available |
| Surface | Hot dip galvanized |
Applications
Used for ranch and dairy fencing, sheep and horse paddocks, orchard and vineyard support, farm subdivision fencing, temporary site hoarding and sand fixation netting. Buyers in North and South America, Australia and Africa are the main market and usually order 1.25 lb and 1.33 lb posts together.
Packing / Delivery / Payment
Bundled by length, 10-20 posts per bundle, steel strapped with end caps for protection; a 20GP holds about 24-26 tons. Stock ships in 10-20 days and production orders in 25-30 days. Payment by L/C at sight or T/T with 30% deposit. Mill certificate, zinc coating test report, packing list and Certificate of Origin are provided.